|
|
|
|
 |
L3A 1/4" (6 mm) Staples
|
|

For use in all Markwell L3 tackers, staples are heavy duty 0.050" x 0.020" (1.27 x 0.5 mm), with unique flat crown width approximately 7/16" (11 mm), normally available in galvanized steel wire, chisel point. Packaged 5m/box.
|
|
 |
|
|
|
|
 |
L3B 5/16" (8 mm) Staples
|
|

For use in all Markwell L3 tackers, staples are heavy duty 0.050" x 0.020" (1.27 x 0.5 mm), with unique flat crown width approximately 7/16" (11 mm), normally available in galvanized steel wire, chisel point. Packaged 5M/box.
|
|
 |
|
|
|
|
 |
L3B 5/16" (8 mm) Staples - Quinpack
|
|

For use in all Markwell L3 tackers, staples are heavy duty 0.050" x 0.020" (1.27 x 0.5 mm), with unique flat crown width approximately 7/16" (11 mm), normally available in galvanized steel wire, chisel point. Packaged in Markwell “Quinpacks” of 5 boxes x 1000 each, and sold as a single 5M "Quinpack".
|
|
 |
|
|
|
|
 |
L3C 3/8" (9.5 mm) Staples
|
|

For use in all Markwell L3 tackers, staples are heavy duty 0.050" x 0.020" (1.27 x 0.5 mm), with unique flat crown width approximately 7/16" (11 mm), normally available in galvanized steel wire, chisel point. Packaged 5M/box.
|
|
 |
|
|
|
|
 |
L3D 9/16" (14 mm) Staples
|
|

For use in all Markwell L3 tackers, staples are heavy duty 0.050" x 0.020" (1.27 x 0.5 mm), with unique flat crown width approximately 7/16" (11 mm), normally available in galvanized steel wire, chisel point. Packaged 5M/box.
|
|
 |
|
|
|
|
 |
L3M 7/16"(11 mm) Staples
|
|

For use in all Markwell L3 tackers, staples are heavy duty 0.050" x 0.020" (1.27 x 0.5 mm), with unique flat crown width approximately 7/16" (11 mm), normally available in galvanized steel wire, chisel point. Packaged 5M/box.
|
|
 |
|
|
|
|
 |
L3MF 1/2" (12.5 mm) Staples
|
|

For use in all Markwell L3 tackers, staples are heavy duty 0.050" x 0.020" (1.27 x 0.5 mm), with unique flat crown width approximately 7/16" (11 mm), normally available in galvanized steel wire, chisel point. Packaged 5M/box.
|
|
 |
|
|
|
|
 |
L4A 1/4" (6 mm) Staples
|
|

For use in all Markwell L4 tackers. Staples are medium duty 0.025" x 0.020" (0.62 x 0.5 mm), galvanized steel wire. Packaged 5M/box
|
|
 |
|
|
|
|
 |
L4AST 1/4" Staples - Sabertooth (needle-point)
|
|

For use in all Markwell L4 tackers. Staples are medium duty 0.025" x 0.020" (0.62 x 0.5 mm), galvanized steel wire. Also used exclusively in the Markwell L4 Pattern tacker
Packaged 5M/box.
|
|
 |
|
|
|
|
 |
L4C 3/8" (9.5 mm) Staples
|
|

For use in all Markwell L4 tackers. Staples are medium duty 0.025" x 0.020" (0.62 x 0.5 mm), galvanized steel wire. Packaged 5M/box.
|
|
 |