Home > Stapling Pliers
Choose a sub category:
Stapling Pliers - Manual Stapling Tackers - Pneumatic
Sort By
Page of 2
Ace Clipper 702 Plier Stapler
Our Price: $17.95

Ideal for bag closing, dry cleaners, tagging laundry, office stapling and light packaging.

• 2-5/8" throat depth
• All steel construction
• Can use 1/4" standard office staples
• Magazine capacity of 210 staples
Bostitch P3 Stapling Plier
Our Price: $21.50

The Bostitch P3 is a manual light duty stapling plier ideal for paper., Overall Length 7 In, Overall height 2 1/2 In, throat depth 2 1/2 In, Quick load magazine uses the SP19 1/4" staple, crown width of 3/8" and 1/4" leg length.

HSP-12 Staplier Plier
Our Price: $26.20

The HSP-12 is a heavy duty plier stapler designed for industrial applications. Rear loading, uses STCR 5019 type staples, or Rapid 31 type, from 1/4 “ through ½”.
Markwell MP6-6 Industrial Stapling Plier
Our Price: $41.50

Uses STCR 2619 type staples to 3/8" (9.5 mm).
Markwell MP6-8 Industrial Stapling Plier
Our Price: $41.50

Uses STCR 5019 type staples to 3/8" (9.5 mm).
Markwell MPL3CS Stapling Plier with Sword Point Anvil
Our Price: $59.10

Manufactured from heavy gauge, hardened steel, epoxy coated, lightweight - weighs less than one pound; Deeper 2-5/8" throat for a longer reach in sealing small cartons. Pointed anvil can be used to remove staples and slit cartons. Uses include heavy duty stapling, tacking, easy staple removal, slitting or opening cartons, closing and tagging burlap, multi-wall and heavy paper bags, closing small boxes and cartons, etc. Uses the following Markwell P3 Series staples: P3A-¼” (6 mm) galvanized P3C-3/8” (9.5 mm) galvanized, and 3/8" Monel wire divergent point

Click here for Parts Schematic
MPL3 Industrial Bag Sealer Staplier Plier
Our Price: $72.70

An Industrial quality stapling plier incorporating a specially designed forked blade with by-pass clinching to provide an easy and low cost method of sealing thin plastic bags.  Simply twist the neck of the bag, hook over the forked blade and the staple wraps around to provide a pilfer-proof seal. This plier is also used in the Veterinary Industry, usually in conjunction with monel staples

Uses the following Markwell P3 Series staples:

P3A-¼” (6 mm) galvanized
P3C-3/8” (9.5 mm) galvanized, and
P3CM - 3/8" Monel wire divergent point.
MPL3 Industrial Staplier Plier
Our Price: $50.35

The "work horse" stapling plier of Industry. Manufactured from heavy gauge, hardened steel, epoxy coated. Features top staple loading, no removable parts, deep reach (throat depth), opens for tacking. Uses specially designed P3C staples.. Its many uses include: Attaching header cards; Sealing padded mailing envelops securely; Securely seals end caps of mailing tubes. Stitches High Temperature Insulating Blankets using P3C Monel SaberTooth staples. Wt: 1 lb. Uses the following Markwell P3 Series staples: P3A-¼” (6 mm) galvanized P3C-3/8” (9.5 mm) galvanized and P3CM - 3/8" Monel wire divergent point


Click here for Parts Schematic
MPL4 Industrial Staplier Plier
Our Price: $50.35

The "work horse" stapling plier of Industry along with the MPL3 plier. Manufactured from heavy gauge, hardened steel, epoxy coated. Features top staple loading, no removable parts, deep reach (throat depth), opens for tacking. Uses specially designed P4 staples. Its many uses include: Attaching header cards; Sealing padded mailing envelops securely; Securely seals end caps of mailing tubes. Wt: 1 lb. Uses the following Markwell P4 Series staples: P4A-¼” (6 mm) galvanized P4C-3/8” (9.5 mm) galvanized


Click here for Parts Schematic
MPL4M Industrial Raised Anvil Stapling Plier
Our Price: $104.50

All the features of the MPL4 Plier Stapler, but fitted with a special design "Wide Jaw" raised anvil which permits stapling over ridges and ribbing; is ideal for overlap stitching or stapling of mattresses, venetian blind tapes, insulated bags, marine sail making, or corrugated and fiber board. Uses full range of Markwell P4 Series staples: P4A-1/4” (6 mm) P4C-3/8” (9.5 mm).

Click here for Parts Schematic